User's Manual

17
10
11
33
60
10
93
93
135
21
22
23. Make sure that all parts are properly tightened before you use the elliptical. Note: Extra parts may be
included. Place a mat under the elliptical to protect the floor or carpet.
21. While a second person holds the Console (33)
near the Handlebar (10), connect the wires on the
Console to the Upright Wire (60) and to the Pulse
Wire (135).
Insert the excess wire into the Handlebar (10).
Tip: Avoid pinching the wires. Attach the
Console (33) to the Handlebar (10) with four M4
x 16mm Screws (93).
22. Attach the Console Cover (11) to the Handlebar
(10) with two M4 x 16mm Screws (93).
Avoid pinching
the wires