User's Manual

35
Note: Specifications are subject to change without notice. For information about ordering replacement parts, see
the back cover of this manual. *These parts are not illustrated.
101 1 Anchored Zip Tie
102 20 M8 x 16mm Screw
103 2 M10 Locknut
104 6 M8 x 45mm Bolt
105 6 M8 Locknut
106 12 Link Arm Bushing
107 4 M10 x 20mm Screw
108 4 M10 Washer
109 1 Frame Wire
110 2 M8 x 23.5mm x 1mm Washer
111 6 Pivot Axle Cover
112 2 M8 Washer
113 2 Crank Axle Cover
114 2 Magnet Assembly
115 2 Pedal Arm Snap Ring
116 4 Long Latch Spring
117 2 Latch
118 2 Latch Spring
119 2 Medium Snap Ring
120 14 Mushroom Fastener/Screw
121 2 Latch Insert
122 1 3/8" x 1/2" Flange Screw
123 2 Latch Housing
124 4 M4 x 42mm Screw
125 1 Power Switch
126 8 M8 x 25mm x 1.5mm Washer
127 1 Grommet
128 6 M8 x 35mm Screw
129 2 Outer Sleeve Bushing
130 2 Small Snap Ring
131 8 M8 Split Washer
132 2 Short Spring Pin
133 1 Frame Cap
134 2 Inner Sleeve Bushing
135 1 Pulse Wire
136 2 Sleeve
137 2 Long Spring Pin
138 4 M4 x 12mm Screw
139 8 M6 x 12mm Screw
140 10 M6 x 13mm Washer
141 4 M4 x 25mm Screw
142 2 M19 x 27mm Wave Washer
* – Userʼs Manual
* – Assembly Tool
* – Grease Packet
* – PTFE Grease Packet
* – Resistance Motor Wire
* – Lift Motor Wire A
* – Lift Motor Wire B
* – Blue Wire
* – Green Wire
* – White Wire
Key No. Qty. Description Key No. Qty. Description