User's Manual

• To watch an assembly

video, go to

http://productvideo.co/

assembly/proform or

use your mobile phone

or smartphone to read

the QR code at the right.

• Assembly requires two

persons.

• Place all parts in a cleared area and remove the

packing materials. Do not dispose of the packing

materials until you ﬁ nish all assembly steps.

• Left parts are marked “L” or “Left” and right parts

are marked “R” or “Right.”

• To identify small parts, see page 7.

• In addition to the included tool(s), assembly

requires the following tools:

one Phillips screwdriver

one rubber mallet

Assembly may be easier if you have your own set

of wrenches. To avoid damaging parts, do not use

power tools.

ASSEMBLY

2. While a second person lifts the Folding Frame

(2), attach the Rear Stabilizer (4) to the Folding

Frame with two M10 x 120mm Screws (100).

Note: The Folding Frame may be in the folded

position.

Note: If the elliptical is in the folded position,

unfold it after completing this step. To unfold the

elliptical, hold the handle on the Rear Stabilizer

(4), press the Latch Button (67), and lower the

Rear Stabilizer and the Folding Frame (2) to the

floor.

100

Handle

1. Go to www.proformservice.com/registration

on your computer and register your product.

• activates your warranty

• saves you time if you ever need to contact

Customer Care

• allows us to notify you of upgrades and offers

Note: If you do not have Internet access, call

Customer Care (see the front cover of this

manual) and register your product.