User's Manual

9
3. While a second person lifts the front of the
Frame (1), attach the Front Stabilizer (3) with
two M10 x 120mm Screws (100).
3
3
1
100
4. Orient the Upright (5) and the Top Cover (23)
as shown. Slide the Top Cover upward onto the
Upright.
Tip: Avoid pinching the Upright Wire (60).
Slide the Upright (5) onto the Frame (1). Attach
the Upright with eight M8 x 16mm Screws (102)
and eight M8 Split Washers (131) (only four of
each are shown); do not tighten the Screws
yet.
4
5
23
60
102
102
102
102
131
131
131
1
Avoid pinching the
Upright Wire (60)