Instructions / Assembly

HOW TO MOVE THE ELLIPTICAL

Due to the size and weight of the elliptical, moving

it requires two persons. Stand in front of the elliptical,

hold the upright (A), and place one foot against one of

the wheels (B). Pull on the upright and have a second

person lift the handle (C) until the elliptical will roll on

the wheels. Carefully move the elliptical to the desired

location, and then lower it to the floor.

HOW TO LEVEL THE ELLIPTICAL

If the elliptical rocks slightly on your floor during use,

turn one or both of the leveling feet (D) beneath the

rear of the frame or turn the leveling foot (E) under

the center of the frame until the rocking motion is

eliminated.

HOW TO USE THE TABLET HOLDER

IMPORTANT: The tablet holder (F) is designed

for use with most full-size tablets. Do not place

any other electronic device or object in the tablet

holder.

To insert a tablet into

the tablet holder (F),

insert the bottom edge

of the tablet in the

tray. Make sure that

the tablet is firmly

secured in the tablet

holder. If applicable

to your tablet holder

model, rotate and/or

pivot the tablet holder

to the desired position.

Reverse these actions to remove the tablet from the

tablet holder..