User's Manual

7
4. Attach the Water Bottle Holder (39) to the
Upright (2) with two M4 x 25mm Self-tapping
Screws (92).
4
39
92
3. While another person holds the Upright (2)
near the Frame (1) as shown, connect the
Upper Wire Harness (51) to the Lower Wire
H
arness (52).
T
ip: Avoid pinching the Wire Harnesses
(51, 52). Insert the Upright (2) into the Frame
(1). Attach the Upright with two M8 x 70mm
Button Bolts (66) and two M8 Locknuts (79).
Do not tighten the Button Bolts yet. Make
sure that the Locknuts are in the indicated
hexagonal holes.
3
2
2
52
Hexagonal
Holes
79
66
1
51
Avoid pinching the
Wire Harnesses (51, 52)