User's Manual

8
6. While another person holds the Console (10)
near the Upright (2), connect the console wire
to the Upper Wire Harness (51).
Tip: Avoid pinching the wires. Attach the
Console (10) to the Upright (2) with four M4 x
16mm Screws (84).
6
10
84
51
Console Wire
2
5. The Console (10) can use four 1.5V “D” bat-
teries (not included); alkaline batteries are rec-
ommended. IMPORTANT: If the Console has
b
een exposed to cold temperatures, allow
it to warm to room temperature before
i
nserting batteries. Otherwise, you may
damage the console displays or other elec-
tronic components. Remove the battery
cover, insert the batteries into the battery
compartment, and reattach the battery cover.
Make sure to orient the batteries as shown
by the diagram inside the battery compart-
ment.
To purchase an optional AC adapter, con-
tact the store where you purchased this
product or call the telephone number on
the cover of this manual. To avoid damag-
ing the console, use only a manufacturer-
supplied AC adapter. Plug one end of the AC
adapter into the jack on the console; plug the
other end into an outlet installed in accor-
dance with all local codes and ordinances.
Batteries
Cover
5
10
Avoid pinching
the wires