User's Manual

5
M10 Locknut
(33)–2
M10
Washer (35)–2
M8 Locknut
(38)–8
M8 x 41mm Bolt (50)–6
M10 x 68mm Bolt (34)–4
Small Wave
Washer (69)–2
M8 Washer
(55)–2
M8 x 77mm Bolt (79)–2
M6 Bolt Set (25)–2
Large Wave
Washer (76)–2
M10 x 25mm
Screw (40)–2
M10 x 73mm Bolt (7)–2
M4 x 16mm
Self-tapping
Screw (52)–8
M8 x 10mm
Screw (27)–6
M8 x 25mm
Screw (56)–2
PART IDENTIFICATION CHART
Use the drawings below to identify the small parts needed for assembly. The number in parentheses below each
drawing is the key number of the part, from the PART LIST near the end of this manual. The number following the
key number is the quantity needed for assembly. Note: If a part is not in the hardware kit, check to see if it
has been preassembled.