User's Manual

15. Apply a generous amount of grease to an M8 x

58mm Shoulder Bolt (104) and to the inside of

the right Link Arm Bracket (45).

Insert the end of the right Link Arm (30) into the

ight Link Arm Bracket (45).

Attach the right Link Arm Bracket (45) with the

M8 x 58mm Shoulder Bolt (104) and an M8

Locknut (94).

Repeat this step on the other side of the

elliptical exerciser.

16. Make sure that all parts of the elliptical exerciser are properly tightened. Note: Some hardware may be

left over after assembly is completed. To protect the floor or carpet from damage, place a mat under the

elliptical exerciser.

rease

104