Model No. PFEVEL89716.0 Serial No. Write the serial number in the space above for reference. USER’S MANUAL Serial Number Decal CUSTOMER SERVICE UNITED KINGDOM Call: 0330 123 1045 From Ireland: 053 92 36102 Website: www.iconsupport.eu E-mail: csuk@iconeurope.com Write: ICON Health & Fitness, Ltd. Unit 4, Westgate Court Silkwood Park OSSETT WF5 9TT UNITED KINGDOM AUSTRALIA Call: 1800 993 770 E-mail: australiacc@iconfitness.
TABLE OF CONTENTS WARNING DECAL PLACEMENT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2 IMPORTANT PRECAUTIONS. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 BEFORE YOU BEGIN. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5 PART IDENTIFICATION CHART.
IMPORTANT PRECAUTIONS WARNING: To reduce the risk of burns, fire, electric shock, or injury to persons, read all important precautions and instructions in this manual and all warnings on your elliptical before using your elliptical. ICON assumes no responsibility for personal injury or property damage sustained by or through the use of this product. 1. It is the responsibility of the owner to ensure that all users of the elliptical are adequately informed of all precautions. 10.
18. The elliptical does not have a freewheel; the pedals will continue to move until the flywheel stops. Reduce your pedaling speed in a controlled way. 20. Over exercising may result in serious injury or death. If you feel faint, if you become short of breath, or if you experience pain while exercising, stop immediately and cool down. 19. Keep your back straight while using the elliptical; do not arch your back.
BEFORE YOU BEGIN Thank you for selecting the revolutionary PROFORM® ENDURANCE 720 E elliptical. The ENDURANCE 720 E elliptical provides an impressive selection of features designed to make your workouts at home more effective and enjoyable. reading this manual, please see the front cover of this manual. To help us assist you, note the product model number and serial number before contacting us. The model number and the location of the serial number decal are shown on the front cover of this manual.
PART IDENTIFICATION CHART Use the drawings below to identify the small parts needed for assembly. The number in parentheses below each drawing is the key number of the part, from the PART LIST near the end of this manual. The number following the key number is the quantity needed for assembly. Note: If a part is not in the hardware kit, check to see if it has been preassembled. Extra parts may be included.
ASSEMBLY • Assembly requires two persons. • In addition to the included tool(s), assembly requires the following tools: • Place all parts in a cleared area and remove the packing materials. Do not dispose of the packing materials until you finish all assembly steps. one Phillips screwdriver one rubber mallet • Left parts are marked “L” or “Left” and right parts are marked “R” or “Right.” Assembly may be easier if you have your own set of wrenches. To avoid damaging parts, do not use power tools.
3. Press the Cover Mounts (106) on the underside of the Rear Stabilizer Cover (15) into the Rear Stabilizer (2). 3 15 106 2 4. With the help of a second person, place some of the packing materials (not shown) under the front of the Frame (1). Have the second person hold the Frame to prevent it from tipping while you complete this step. 4 6 Attach the Front Stabilizer (6) to the Frame (1) with two M10 x 122mm Screws (104) and two M10 Split Washers (105).
5. Orient the Upright (4) as shown. Have a second person hold the Upright near the Frame (1). 5 A See the inset drawing. Locate the wire tie (A) in the lower end of the Upright (4). Tie the wire tie to the Main Wire (110). Then, pull the upper end of the wire tie until the Main Wire is routed through the Upright. 110 4 110 Tip: To prevent the Main Wire (110) from falling into the Upright (4), secure the Main Wire with the wire tie (A). A 1 6. Tip: Avoid pinching the Main Wire (110).
7. Using a plastic bag to keep your fingers clean, apply some of the included grease to the Pivot Axle (35) and to two 16mm Wave Washers (54). 7 Insert the Pivot Axle (35) through the Upright (4) and center it. Tip: It may be helpful to use a rubber mallet. 4 Next, identify the Right Upper Body Leg (60) and orient it as shown. 35 Grease 46 Slide a 16mm Wave Washer (54) and the Right Upper Body Leg (60) onto the right side of the Pivot Axle (35).
9. Untie and discard the wire tie on the Main Wire (110). 9 7 While a second person holds the Console (7) near the Upright (4), connect the wires on the Console to the Main Wire (110) and to the Sensor Wires (63). 63 Insert the excess wire into the Upright (4). 4 110 10. Tip: Avoid pinching the wires. Attach the Console (7) to the Upright (4) with four M4 x 16mm Screws (101); start all the Screws, and then tighten them.
11. Orient the Right Pedal Arm (58) as shown. 11 Apply grease to the axle on the Right Pedal Arm (58). Attach the Right Pedal Arm (58) to the Right Roller Arm (59) with an M8 x 14mm Shoulder Screw (126), a Small Axle Cover (55), and an M8 Washer (97). 44 Repeat this step for the Left Pedal Arm (44). 55 126 59 97 Grease 58 12. Apply grease to one of the Pedal Arm Axles (64).
. Orient the Rear Upright Cover (81) as shown. 13 Attach the Rear Upright Cover (81) to the Upright (4) with four M4 x 16mm Screws (101); start all the Screws, and then tighten them. 117 Orient the Front Upright Cover (117) as shown. Attach the Front Upright Cover (117) around the Upright (4) by pressing it onto the Rear Upright Cover (81). 101 4 81 14. Identify the Right Arm Front Cover (65) and orient it as shown.
15. Identify the Right Leg Inner Cover (83) and orient it as shown. 15 Attach the Right Leg Inner Cover (83) to the Right Upper Body Leg (60) with an M4 x 16mm Screw (101) and an M5 Washer (94). Next, identify the Right Upper Leg Outer Cover (69) and orient it as shown. 60 Attach the Right Upper Leg Outer Cover (69) around the Right Upper Body Leg (60) by pressing it onto the Right Leg Inner Cover (83). 83 Repeat this step on the other side of the elliptical. 16.
17. Orient the Rear Console Cover (80) as shown. 17 79 Attach the Rear Console Cover (80) to the Upright (4) with two M4 x 16mm Screws (101). 101 Next, orient the Front Console Cover (79) as shown. Attach the Front Console Cover (79) around the Upright (4) by pressing it onto the Rear Console Cover (80). 4 80 18. Attach the Tablet Holder (127) to the back of the Console (7) with four #8 x 12mm Screws (111); start all the Screws, and then tighten them. 18 7 127 111 19.
HOW TO USE THE ELLIPTICAL HOW TO PLUG IN THE POWER CORD Follow the steps below to plug in the power cord. This product must be earthed. If it should malfunction or break down, earthing provides a path of least resistance for electric current to reduce the risk of electric shock. This product’s power cord has an equipment-earthing conductor and an earthing plug. IMPORTANT: If the power cord is damaged, it must be replaced with a manufacturer-recommended power cord. 1.
HOW TO MOVE THE ELLIPTICAL HOW TO LEVEL THE ELLIPTICAL Due to the size and weight of the elliptical, moving it requires two persons. Stand in front of the elliptical, hold the upright, and place one foot against one of the wheels. Pull on the upright and have a second person lift the handle until the elliptical will roll on the wheels. Carefully move the elliptical to the desired location, and then lower it to the floor.
HOW TO ADJUST THE POSITIONS OF THE PEDALS Upper Body Arms Each pedal can be adjusted to several positions. To adjust each pedal, simply pull the pedal handle outward, move the pedal to the desired position, and then release the pedal handle into an adjustment hole beneath the pedal. Make sure to adjust both pedals to the same position.
CONSOLE DIAGRAM FEATURES OF THE CONSOLE You can even connect your personal audio player to the console sound system and listen to your favorite music or audio books while you exercise. The advanced console offers an array of features designed to make your workouts more effective and enjoyable. You can also use the charging port on the console to charge your USB-compatible device while you exercise.
HOW TO TURN ON THE POWER HOW TO USE THE MANUAL MODE IMPORTANT: If the elliptical has been exposed to cold temperatures, allow it to warm to room temperature before you turn on the power. If you do not do this, you may damage the console displays or other electrical components. 1. Begin pedaling or press any button on the console to turn on the console. Plug in the power cord (see HOW TO PLUG IN THE POWER CORD on page 16). Next, locate the power switch on the frame near the power cord.
4. Follow your progress with the display. The matrix offers several display tabs. Press the increase and decrease buttons next to the Enter button repeatedly until the desired tab is shown. The display can show the following workout information: Speed—This tab will show a profile of the speed settings of the workout. A new segment will appear at the end of each minute. y Trail—This tab will show a track that represents M 1/4 mile (400 m).
Change the volume level of the console by pressing the volume increase and decrease buttons. If the display does not show your heart rate, make sure that your hands are positioned as described. Be careful not to move your hands excessively or to squeeze the contacts tightly. For optimal performance, clean the contacts using a soft cloth; never use alcohol, abrasives, or chemicals to clean the contacts. 5. Measure your heart rate if desired.
HOW TO USE AN ONBOARD WORKOUT height of the flashing segment indicates the target rpm or the resistance level for the current segment. 1. Begin pedaling or press any button on the console to turn on the console. At the end of each segment of the workout, a series of tones will sound and the next segment of the profile will begin to flash.
4. Follow your progress with the display. HOW TO USE THE CHARGING PORT See step 4 on page 21. The console features a charging port that you can use to charge USB-compatible devices, such as smartphones, while you exercise. 5. Measure your heart rate if desired. See step 5 on page 22. To use the charging port, plug a USB charging cable (not included) into the charging port on the console and into the receptacle on your device; make sure that the USB charging cable is fully plugged in.
HOW TO CONNECT YOUR SMART DEVICE TO THE CONSOLE 4. Disconnect your smart device from the console if desired. The console supports BLUETOOTH connections to smart devices via the iFit app and to compatible heart rate monitors. Note: Other BLUETOOTH connections are not supported. To disconnect your smart device from the console, press and hold the Bluetooth Smart button on the console for 5 seconds.
HOW TO CHANGE CONSOLE SETTINGS Incline System Calibration—If the incline system is not functioning properly, it may need to be calibrated. To calibrate the incline system, press the Quick Ramp increase or decrease button. The ramp will move upward and downward as it calibrates. When the ramp stops moving, the incline system is calibrated. 1. Select the settings mode. To select the settings mode, press the gear button. The settings information will appear in the display. 2. Navigate the settings mode.
MAINTENANCE AND TROUBLESHOOTING MAINTENANCE If lines appear in the console display, see HOW TO CHANGE CONSOLE SETTINGS on page 26 and adjust the contrast level of the display. Regular maintenance is important for optimal performance and to reduce wear. Inspect and properly tighten all parts each time the elliptical is used. Replace any worn parts immediately.
HOW TO ADJUST THE REED SWITCH Slightly loosen the indicated M4 x 16mm Screw (101). Slide the Reed Switch (38) slightly closer to or away from the Magnet (43), and retighten the Screw. If the console does not display correct feedback, the reed switch should be adjusted. To adjust the reed switch, first press the power switch to the off position and unplug the power cord. Next, use a standard screwdriver to pry off the left Disc (71).
HOW TO ADJUST THE DRIVE BELT See EXPLODED DRAWING C on page 35. Identify the Left and Right Shields (73, 74). Remove the M4 x 19mm Screws (5), the M4 x 25mm Screws (139), and the M4 x 48mm Screw (107) from the Left and Right Shields; make sure to note the location of each size of Screw. Then, remove the Right Shield. If the pedals slip while you are pedaling, even while the resistance is adjusted to the highest level, the drive belt may need to be adjusted.
EXERCISE GUIDELINES Burning Fat—To burn fat effectively, you must exercise at a low intensity level for a sustained period of time. During the first few minutes of exercise, your body uses carbohydrate calories for energy. Only after the first few minutes of exercise does your body begin to use stored fat calories for energy. If your goal is to burn fat, adjust the intensity of your exercise until your heart rate is near the lowest number in your training zone.
PART LIST Key No. Qty. 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 1 1 1 1 6 1 1 2 1 1 1 1 1 1 1 2 2 1 1 2 4 1 1 1 1 1 4 1 1 4 1 1 2 2 1 2 1 1 1 2 1 1 2 1 1 1 1 1 1 6 Model No. PFEVEL89716.0 R1016A Description Key No. Qty.
Key No. Qty. 101 102 103 104 105 106 107 108 109 110 111 112 113 114 115 116 117 118 119 120 121 122 35 6 8 4 8 3 1 2 2 1 4 1 1 4 1 2 1 1 1 1 6 1 Description Key No. Qty.
33 101 121 21 30 104 114 121 3 21 106 15 92 16 105 121 10 33 84 121 114 21 2 101 23 101 12 30 121 84 48 11 20 90 85 120 17 102 21 108 86 26 84 14 92 13 38 17 140 122 29 22 78 24 50 42 50 101 31 40 27 115 91 28 88 101 102 50 39 101 90 43 123 82 112 41 25 19 113 43 109 124 125 101 89 93 40 1 32 30 6 34 86 124 50 105 18 85 50 20 125 101 90 108 78 30 109 34 104 EXPLODED DRAWING A Model No. PFEVEL89716.
136 135 133 129 128 47 132 103 135 95 76 49 101 62 97 44 136 103 130 82 131 96 100 68 101 102 82 135 101 95 57 97 53 77 94 64 70 101 100 67 56 97 98 51 57 77 46 95 82 72 95 8 55 95 97 45 97 126 55 97 137 51 98 56 53 8 126 57 95 134 53 56 52 66 56 59 82 83 100 9 97 77 101 57 77 95 87 97 82 95 96 101 58 64 94 60 97 82 53 65 97 100 137 61 69 102 101 57 62 101 EXPLODED DRAWING B Model No. PFEVEL89716.
71 138 7 116 101 101 5 5 101 127 63 107 37 111 101 5 81 35 139 139 80 54 36 73 4 75 105 99 101 79 5 5 99 101 36 105 74 54 117 5 35 118 110 116 119 101 101 138 71 EXPLODED DRAWING C Model No. PFEVEL89716.
ORDERING REPLACEMENT PARTS To order replacement parts, please see the front cover of this manual.