User's Manual

8
10. Make sure that all parts are properly tightened before you use the exercise cycle. Note: After assembly is
completed, some extra parts may be left over. Place a mat beneath the exercise cycle to protect the floor.
9. Identify the Left Pedal (24), which is marked with an
“L.” Using an adjustable wrench, firmly tighten the
Left Pedal counterclockwise into the Left Crank Arm
(
42). Tighten the Right Pedal (not shown) clockwise
into the Right Crank Arm. Important: Tighten both
P
edals as firmly as possible. After using the
exercise cycle for one week, retighten the Pedals.
For best performance, the Pedals must be kept
tightened.
Adjust the Left Pedal Strap (25) to the desired posi-
tion, and press the end of the Pedal Strap onto the
tab on the Left Pedal (24). Adjust the Right Pedal
Strap (not shown) in the same way.
9
24
42
25
Tab
HOW TO OPERATE THE EXERCISE CYCLE
HOW TO ADJUST THE SEAT POST
For effective exer-
cise, the seat
should be at the
proper height. As
you pedal, there
should be a slight
bend in your knees
when the pedals
are in the lowest
position. To adjust
the height of the
seat, first turn the
indicated knob
counterclockwise two or three turns to loosen it (if the
knob is not loosened enough, it may scratch the seat
post). Next, pull the knob, slide the seat post to the
desired height, and then release the knob. Move the
seat post up and down slightly until the pin on the
knob snaps into one of the holes in the seat post.
Then, turn the knob clockwise until it is tight.
HOW TO ADJUST THE SEAT
The seat can be
adjusted to the posi-
tion that is the most
comfortable for you.
Before adjusting
the seat, dismount
the exercise cycle;
do not adjust the
seat while you are
sitting on it. To
adjust the seat, first
turn the indicated
knob counterclockwise two or three turns to loosen it (if
the knob is not loosened enough, it may scratch the
seat bracket). Next, pull the knob, slide the seat to the
desired position, and then release the knob. Move the
seat bracket forward and backward slightly until
the pin on the knob snaps into one of the holes in
the seat bracket. Then, turn the knob clockwise until it
is tight.
Seat
Post
Knob
Seat
Seat
Bracket
Seat
Knob