User's Manual

6
1
22
74
1
1. Orient the Front Stabilizer (22) as shown.
While a second person lifts the front of the Base
(1), attach the Front Stabilizer (22) to the Base
with two 3/8" x 2 1/4" Screws (74).
ASSEMBLY
• Assembly requires two persons.
• Place all parts in a cleared area and remove the
packing materials. Do not dispose of the packing
materials until you complete all assembly steps.
• To identify small parts, see page 5.
• In addition to the included tool(s), assembly
requires the following tools:
one Phillips screwdriver
one adjustable wrench
Assembly may be easier if you have a set of
wrenches. To avoid damaging parts, do not use
power tools.