Warranty

129

13. Note: You can attach your own pedals if

desired.

Identify the Right Pedal (62).

Using the included flat wrench tool, firmly

tighten the Right Pedal (62) clockwise into the

Right Crank Arm (64).

Firmly tighten the Left Pedal (not shown)

counterclockwise into the Left Crank Arm

(not shown). IMPORTANT: You must turn the

Left Pedal counterclockwise to attach it.

14. Attach the Water Bottle Holder (129) to the

Frame (2) with two M4 x 10mm Screws (116).

116

128

16. After the training bike is assembled, inspect it to make sure that it is assembled correctly and that it

functions properly. Make sure that all parts are properly tightened before you use the training bike.

Extra parts may be included. Place a mat beneath the training bike to protect the floor.

15. Attach the Tray (8) to the Frame (2) with two

M4 x 10mm Screws (116).

Then, set the two Hand Weights (128) in the

Tray (8).

116