Instructions / Assembly

19
HOW TO USE THE MANUAL MODE
1. Touch the screen or begin pedaling to activate
the console.
See HOW TO TURN ON THE POWER on
page 17.
2. Select the main menu.
When you turn on the console, the main menu will
appear on the screen after the console boots up.
Touch the home button at the bottom of the screen
to return to the main menu at any time.
Touch the Start button to start a manual workout.
3. Change the incline (resistance) of the training
bike as desired.
As you pedal, change the incline (resistance) of the
training bike by pressing the Grade increase and
decrease buttons on the console.
You can also change the incline of the training
bike by pressing the shifter buttons. To increase
the incline, press the front and rear buttons on the
right shifter simultaneously; to decrease the incline,
press the front and rear buttons on the left shifter
simultaneously.
Note: After you press a button, it will take a
moment for the training bike to reach the selected
incline level. You will hear the incline motor
while the incline is changing. This is normal.
CAUTION: The training bike can move through
a broad range of incline levels. Hold the handle-
bars and be prepared for the training bike to
move when you change the incline.
4. Change gears as desired.
You can set up the training bike to simulate
your road bike. To select the gearing option(s)
for the training bike, see step 7 on page 24.
Note: The training bike simulates gears; there are
no actual gears.
Change gears by pressing the buttons on the
shifters. Note: After you press a button, it will take
a moment for the training bike to change to the
selected gear. To avoid damaging the shift-
ers, do not pull on the shifters or squeeze the
shifters.
Press the buttons on the left shifter to change the
front gear; press the buttons on the right shifter to
change the rear gear.
On the left shifter, press the front button to increase
the resistance; press the rear button to decrease
the resistance.
On the right shifter, press the front button to
decrease the resistance; press the rear button to
increase the resistance.
The numbers of the currently selected front and
rear gears will appear in the display on the screen.
5. Follow your progress.
The console offers several display modes. The
display mode that you select will determine which
workout information is shown.
To select the desired display mode, simply flick or
slide the screen. You can also view additional work-
out information by touching the red boxes on the
screen.
If desired, adjust
the volume level by
pressing the vol-
ume increase and
decrease buttons on
the console.
To pause the workout, stop pedaling or touch either
the back button or the home button at the bottom
of the screen. To continue the workout, touch the
Resume button. To end the workout session, touch
the End Workout button.
When you touch the End Workout button, a work-
out summary will appear on the screen. After you
view the workout summary, touch the Finish button
to return to the main menu. You may also be able
to either save or publish your results using one of
the options on the screen.