Instructions / Assembly

26
HOW TO USE THE MAINTENANCE MODE
IMPORTANT: Some of the features described may
not be enabled. Occasionally, a firmware update may
cause your console to function slightly differently.
1. Select the settings main menu.
See step 1 on page 24.
2. Select the maintenance mode.
In the settings main menu, touch the Maintenance
button to enter the maintenance mode.
The maintenance mode main screen will show
information about the console and the wireless
network.
3. Update the console firmware.
For the best results, regularly check for firmware
updates.
Touch the Firmware Update button to check for
firmware updates using your wireless network. The
update will begin automatically. Note: If there are
no firmware updates available, touch the back but-
ton on the screen.
IMPORTANT: To avoid damaging the training
bike, do not turn off the power while the firm-
ware is being updated.
The screen will show the progress of the update.
When the update is complete, the training bike will
turn off and then turn back on. If it does not, press
the power switch into the off position. Wait for sev-
eral seconds, and then press the power switch into
the reset position. Note: It may take a few minutes
for the console to be ready for use.
Note: Occasionally, a firmware update may cause
your console to function slightly differently. These
updates are always designed to improve your train-
ing experience.
4. Calibrate the incline system of the training bike.
Touch the Calibrate Incline button. T h e n , t o u c h t h e
Begin button to calibrate the incline system.
The training bike will automatically rise to the maxi-
mum incline level, lower to the minimum incline
level, and then return to the starting position. This
will calibrate the incline system.
IMPORTANT: Keep pets, feet, and other objects
away from the training bike while the incline
system is calibrating.
When the incline system is calibrated, touch the
back button on the screen.
5. View machine information.
Touch the Machine Info button to view information
about your training bike. After you view the informa-
tion, touch the back button on the screen.
6. Find keycodes.
This option is intended to be used by service
technicians to identify whether a certain button is
working correctly.
7. Exit the maintenance mode.
To exit the maintenance mode, touch the back but-
ton on the screen.