User's Manual

13
H
OW TO USE THE MANUAL MODE
1
. Begin pedaling or press any button on the
console to turn on the console.
When you turn on the console, the display will turn
o
n. The console will then be ready for use.
2. Select the manual mode.
Each time you turn on the console, the manual
mode will be selected.
If you have selected a workout, press any of the
Workouts or Fitness Games buttons (see the
drawing on page 12) repeatedly until zeroes
appear in the display.
3. Change the resistance of the pedals as
desired.
As you pedal, change the resistance of the pedals
by pressing the resistance increase and decrease
buttons (see the drawing on page 12) repeatedly.
Note: After you press the buttons, it will take a
moment for the pedals to reach the selected resis-
tance level.
4. Follow your progress with the display.
The console offers several display modes. The
display mode that you select will determine which
workout information is shown. Press the Display
button (see the drawing on page 12) repeatedly to
select the desired display mode.
T
he display can show the following workout infor-
mation:
Time—When the manual mode is selected, this
display will show the elapsed time. When a work-
out is selected, the display will show the time
r
emaining in the workout instead of the elapsed
time.
Speed—This display will show your pedaling
speed, in miles per hour (MPH) or kilometers per
hour (KM/H).
Distance—This display will show the distance you
have pedaled, in miles or kilometers.
Calories—This display will show the approximate
number of calories you have burned.
Watts—This display will show your approximate
power output in watts.
Pulse—This display will show your heart rate
when you use the handgrip pulse sensor (see step
5 on page 14).
Resistance—This display will show the resistance
level of the pedals for a few seconds each time
the resistance level changes.
Profile—When a workout is selected, this display
will show a profile of the resistance settings for the
workout.
Display Settings—The console offers a display
settings mode that can be entered when the words
HOLD DISPLAY FOR SETTINGS appear in the
display. To change the display settings, see HOW
TO CHANGE THE CONSOLE SETTINGS on page
19.