User's Manual

11
9
5
20
1
48
Adjustment
Holes
9. Loosen and remove the Seat Post Knob (48)
from the Frame (1).
Next, insert the Seat Post (5) into the Frame (1),
and press the Seat Post Bushing (20) downward
into the Frame.
Slide the Seat Post (5) upward or downward to
the desired position, and then insert the Seat
Post Knob (48) into the Frame (1) and into one
of the adjustment holes in the Seat Post. Then,
tighten the Seat Post Knob.
10
10. Unite and discard the wire tie on the Main
Wire (31).
Hold the Console Plate (19) near the Upright (3).
Insert the Main Wire (31) upward through the
Console Plate.
Next, insert the Console Plate (19) into the
Upright (3), and align the indicated large holes.
19
3
31
Large Holes