User's Manual

20
THE SETTINGS MODE
The console features a settings mode that allows you
to select a unit of measurement for the console and to
view console usage information.
1. Select the settings mode.
To select the settings mode,
press and hold down the
Display Mode button for
a few seconds until the
settings mode information
appears in the display.
2. Select a unit of measurement if desired.
The console can show pedaling speed and dis-
tance in either miles or kilometers.
The upper display will show the selected unit of
measurement. An E for English miles or an M for
metric kilometers will appear in the upper display.
To c h ange the unit of m eas u reme nt, p ress the
Resistance decrease button repeatedly.
Note: When you replace the batteries, it may be
necessary to reselect the unit of measurement.
3. View console usage information if desired.
The center display will show the total number of
hours that the console has been used since the
exercise bike was purchased. The lower display
will show the total distance that the pedals have
moved since the exercise bike was purchased.
4. Exit the settings mode.
Press the Display Mode button to exit the settings
mode.
HOW TO USE THE SOUND SYSTEM
To p l ay m usic or a udio boo k s th roug h the con s ole
sound system while you exercise, plug a 3.5 mm male
to 3.5 mm male audio cable (not included) into the jack
on the console and into a jack on your MP3 player,
CD player, or other personal audio player; make sure
that the audio cable is fully plugged in. Note: To
purchase an audio cable, see your local electronics
store.
Next, press the play button on your
personal audio player. Adjust the vol-
ume level using the volume increase
and decrease buttons on the console
or the volume control on your per-
sonal audio player.