User's Manual

9
5
1
3
44
44
45
45
31
Avoid pinching the
Main Wire (31)
5. Tip: Avoid pinching the Main Wire (31). Set
the Upright (3) on the Frame (1).
Attach the Upright (3) with four M8 x 25mm
Screws (44) and four M8 Split Washers (45).
Tip: Start all the Screws, and then tighten
them.
6
6. Orient the Top Shield (9) as shown. Slide the Top
Shield onto the Upright (3).
Attach the Top Shield (9) to the Frame (1) with
two M4 x 16mm Screws (40).
Orient the Top Shield Cap (10) as shown. Press
the Top Shield Cap onto the Left and Right
Shields (17, 18).
1
3
40
17, 18
9
10