Instructions / Assembly

12
12
77
15
14
49
49
50
Avoid pinching
the wires
13
13. Slide the Console Cover (16) upward against
the Handlebar (14). Attach the Console Cover
with three M4 x 16mm Screws (49); start all the
Screws, and then tighten them.
14
49
16
12. While a second person holds the Console (15)
near the Handlebar (14), connect the wires on
the Console to the Main Wire (77) and the Pulse
Wire (50).
Then, insert the excess wire into the
Handlebar (14).
Tip: Avoid pinching the wires. Attach the
Console (15) to the Handlebar (14) with four
M4 x 16mm Screws (49); start all the Screws,
and then tighten them.`