Instructions / Assembly

MAINTENANCE

Regular maintenance is important for optimal

performance and to reduce wear. Inspect and properly

tighten all parts each time the exercise bike is used.

Replace any worn parts immediately.

To clean the exercise bike, use a damp cloth and a

small amount of mild soap. IMPORTANT: To avoid

damage to the console, keep liquids away from

the console and keep the console out of direct

sunlight.

CONSOLE TROUBLESHOOTING

If the console does not display your heart rate when

you use the handgrip heart rate monitor, see step 8 on

page 19.

If a replacement power adapter is needed, call the

telephone number on the cover of this manual.

IMPORTANT: To avoid damaging the console, use

only a manufacturer-supplied regulated power

adapter.

HOW TO ADJUST THE REED SWITCH

If the console does not display correct feedback, the

reed switch should be adjusted.

To adjust the reed

switch, first unplug the

power adapter. Next,

use a standard screw-

driver and release the

tabs on the Accessory

Tray (5). Then, lift the

Accessory Tray away

from the frame.

Next, locate the Reed Switch (78). Loosen, but do not

remove, the M4 x 12mm Washer Head Screw (65).

Next, rotate the Pulley (75) until a Magnet (67) is

aligned with the Reed Switch (78). Slide the Reed

Switch slightly toward or away from the Magnet. Then,

retighten the M4 x 12mm Washer Head Screw (65).

Plug in the power adapter and rotate the Pulley (75)

for a moment. Repeat these actions until the console

displays correct feedback.

When the reed switch is correctly adjusted, reattach

the accessory tray and plug in the power adapter.

MAINTENANCE AND TROUBLESHOOTING