User's Manual

11
15. Attach the Center Top Frame (6) to the Right and
Left Top Frames (3, 4) with four M10 x 70mm
B
olts (57), four M10 Washers (109), and two M10
Nylon Locknuts (111).
Do not tighten the Bolts
y
et.
Attach a Weight Guide (30) inside the Center Top
Frame (6) with an M10 x 65mm Bolt (110), two
M10 Washers (109), a 1/2" Spacer (68), and an
M10 Nylon Locknut (111).
Attach the other three Weight Guides (30) to
the Center Top Frame (6) in the same manner.
Tighten the bolts, screws and locknuts used
in steps 4, 5, 8, 10, 11, and 12.
16. Apply grease to 2" Bushing (63). Attach the Leg
Lever (15) and the 2" Bushing to the Curl Post
Upright (10) with an M10 x 70mm Bolt (57) and
an M10 Nylon Locknut (111).
17. Apply grease to a 3" Bushing (71) and the two
Large Round Bushings (61) in the Right Butterfly
Arm (23). Attach the Butterfly Arm and 3" Bushing
to the Butterfly Frame (24) with an M10 x 100mm
Bolt (85) and an M10 Nylon Locknut (1
1
1).
Repeat this step with the Left Butterfly Arm
(22).
6
3
4
111
5
7
111
109
109
30
30
109
109
110
6
8
15
5
7
15
10
57
Grease
111
63
85
24
71
23
61
61
22
1
1
1
16
17
91
Grease
Grease
Arm Assembly