User's Manual

13
22. Apply grease to an M10 x 70mm Bolt (57). Attach
a Press Arm Handle (27) to the Left Press Arm
(
25) with the Bolt and an M10 Nylon Locknut
(111).
Do not overtighten the Locknut; the
P
ress Arm Handle must be able to pivot easily.
Repeat this step with the other Press Arm
Handle (27) and the Right Press Arm (26).
24. Apply grease to an M10 x 75mm Bolt (96). Attach
the Leg Press Plate (29) and a 2 3/4" Bushing
(65) to the Leg Press (12) with the Bolt and an
M10 Nylon Locknut (111). Do not overtighten the
Locknut; the Leg Press Plate must be able to
pivot easily.
25. During steps 25–54, see the CABLE DIA-
GRAMS on pages 27 and 28 to identify the
cables and ensure proper cable routing.
Locate the Butterfly Cable (73).
Attach the
Cable to the Right Upright (7) with an M8 x 25mm
Shoulder Bolt (92) and an M8 Nylon Locknut
(101). Make sure that the Cable end can pivot
easily around the shoulder of the Bolt.
23. Apply grease to a 2 3/4" Bushing (65). Orient the
Leg Press (12) with the welded spacer on the indi-
cated side. Attach the Leg Press and the 2 3/4"
Bushing to the Left Base (2) with an M10 x 95mm
Bolt (108) and an M10 Nylon Locknut (111).
1
11
22
23
25
27
27
26
12
2
111
108
65
Grease
96
29
12
24
25
92
73
7
101
5
7
G
rease
Grease
111
Cable Assembly
Welded
Spacer