Owners manual

16. Remove the 5/16" Nut (9) and the 5/16" x 2 1/4"

Bolt (4) from the bracket on the Frame (52).

Align the upper end of the Storage Latch (56)

with the bracket on the Frame (52), and insert

the 5/16" x 2 1/4" Bolt (4) through the bracket

and the Storage Latch. This will push a spacer

(L) out of the Storage Latch; discard the

spacer.

Next, tighten the 5/16" Nut (9) onto the 5/16" x

2 1/4" Bolt (4). Do not overtighten the Nut; the

Storage Latch (56) must be able to pivot.

Then, lower the Frame (52) (see HOW TO

LOWER THE TREADMILL FOR USE on page 28).

17. Firmly tighten the four 3/8" x 2 3/4" Screws (23)

and the four 3/8" x 1 1/4" Screws (20).

Next, slide and the Left and Right Upright Covers

(89, 90) down until they snap into place.