Owners manual

18. Press the two tabs (not shown) on the Tablet

Holder (100) into the slots (M) in the console

assembly (G).

Then, attach the Tablet Holder (100) with four

#8 x 5/8" Screws (99). Tip: Start the two upper

Screws ﬁ rst, and then start the two lower

Screws. Do not overtighten the Screws.

IMPORTANT: The Tablet Holder (100) is

designed for use with most full-size tablets.

Do not place any other electronic device or

object in the Tablet Holder.

19. Make sure that all parts are properly tightened before you use the treadmill. If there are sheets of plastic

on the treadmill decals, remove the plastic. To protect the ﬂ oor or carpet, place a mat under the treadmill. To

avoid damage to the console, keep the treadmill out of direct sunlight. Keep the included hex keys in a secure

place; one of the hex keys is used to adjust the walking belt (see pages 30 and 31). Note: Extra parts may be

included.

100

Start First