Owners manual

b. If the walking belt slips when walked on, ﬁ rst

remove the key and UNPLUG THE POWER

CORD. Using the hex key, turn both idler roller

screws clockwise, 1/4 of a turn. When the walking

belt is correctly tightened, you should be able to lift

each edge of the walking belt 2 to 3 in. (5 to 7 cm)

off the walking platform. Be careful to keep the

walking belt centered. Then, plug in the power

cord, insert the key, and walk on the treadmill for a

few minutes. Repeat until the walking belt is prop-

erly tightened.