User's Manual

16
16
99
100
B
99
16. Note: If you purchased the optional iFit module
(see page 24), follow the instructions included
with the iFit module to insert the iFit module into
the console assembly (B) before you attach the
Tablet Holder (100).
Attach the Tablet Holder (100) to the back of
the console assembly (B) with four 1/4" x 5/8"
Screws (99); start all four Screws, and then
tighten them. Do not overtighten the Screws.
17. Make sure that all parts are properly tightened before you use the treadmill. If there are sheets of plastic
on the treadmill decals, remove the plastic. To protect the fl oor or carpet, place a mat under the treadmill. To
avoid damage to the console, keep the treadmill out of direct sunlight. Keep the included hex keys in a secure
place; one of the hex keys is used to adjust the walking belt (see pages 30 and 31). Note: Extra parts may be
included.