User's Manual

DEMO—The console features a display demo

mode, designed to be used if the treadmill is dis-

played in a store. While the demo mode is turned

on, the console will function normally when you

plug in the power cord, press the power switch

into the reset position, and insert the key into the

console. However, when you remove the key, the

displays will remain lit, although the buttons will not

function. If the demo mode is turned on, the word

ON will appear in the matrix. To turn on or turn off

the demo mode, press the Enter button.

CONTRAST LVL—Press the Incline increase and

decrease buttons to adjust the contrast level of the

display.

If an iFit module is connected, you may also

select the following screens:

TRAINER VOICE—To turn on or turn off the audio

coach, press the Enter button.

DEFAULT MENU—The default menu will appear

when you insert the key into the console or when

you press the Home button. Press the Enter but-

ton repeatedly to select the manual main screen or

the iFit screen as the default menu.

CHECK WIFI STATUS—Press the Enter button

to check the status of your iFit module. The lower

display will show the software version number, the

network SSID, the network encryption type, the

connection status, the wireless signal strength, the

IP address of the module, the number of regis-

tered users and their names, the results of the

DNS lookup, and the status of the iFit server.

SEND/RECEIVE DATA—To send and receive

workouts, workout logs, and updates, press the

Enter button. When the process is ﬁ nished, the

words TRANSFERS DONE will appear in the

display.

3. Exit the settings mode.

To exit the settings mode, press the Settings

button.

HOW TO USE THE TABLET HOLDER

You can use your tablet to browse media while you

exercise. Place your tablet on the tablet holder and let

the tablet holder hold your tablet in place.

Tablet Holder