User's Manual

15. Insert the Upright Wire (81) and the other wire

(F) through the two indicated looped ties on the

console assembly (G).

See the inset drawing. Connect the Upright

Wire (81) and the other wire (F) to the console

wires. The connectors should slide together

easily and snap into place. If they do not, turn

one connector and try again. IF YOU DO NOT

CONNECT THE CONNECTORS PROPERLY,

THE CONSOLE MAY BECOME DAMAGED

WHEN YOU TURN ON THE POWER.

Insert all excess wires into the console assembly

(G). Then, pull the two ties tight against the wires

and cut off the ends of the ties.

16. Insert the wire (F) on the left side through the

two indicated looped ties on the console assem-

bly (G). Then, connect the wire to the wire from

the console.

Insert all excess wires into the console assembly

(G). Then, pull the two ties tight against the wires

and cut off the ends of the ties.

Ties

Console

Wires

Console

Wire