User's Manual

22. Make sure that all parts are properly tightened before you use the treadmill. If there are sheets of plastic

on the treadmill decals, remove the plastic. To protect the oor or carpet, place a mat under the treadmill. To

avoid damage to the console, keep the treadmill out of direct sunlight. Keep the included hex keys in a secure

place; one of the hex keys is used to adjust the walking belt (see pages 33 and 34). Note: Extra parts may be

included.

21. Attach the Tablet Holder (88) to the back of

the console assembly (G) with four #8 x 1/2"

Machine Screws (8); start all four Machine

Screws, and then tighten them. Do not over-

tighten the Machine Screws.