User's Manual

12
10. With the help of a second person, hold the con-
sole assembly near the Right Handrail (64).
Connect the Upright Wire (63) to the console
wire. See the inset drawing. The connectors
should slide together easily and snap into
place. If they do not, turn one connector and try
again. IF YOU DO NOT CONNECT THE CON-
NECTORS PROPERLY, THE CONSOLE MAY
BECOME DAMAGED WHEN YOU TURN ON
THE POWER. Then, remove the wire tie from
the Upright Wire.
Connect the console wire to the ground wire on
the Console Crossbar (61).
64
10
63
61
Ground
Wires
Console
Assembly
Console
Wire
63
Wire
Tie
9
61
7
5
5
8
8
23
76
66
9. Attach the Console Crossbar (61) to the Left
and Right Uprights (66, 76) with four #10 x 3/4"
Screws (8) and four #10 Star Washers (23).
Start all four Screws, and then tighten them.
Firmly tighten the two 5/16" x 3/4" Screws (5)
and the two 5/16" x 3" Screws (7).
23
7
Console
Wire