User's Manual

8. With the help of a second person, hold the con-

sole assembly near the Handrails (84) (only one

side is shown).

See the inset drawing. Connect the Upright

Wire (81) to the console wire. The connectors

should slide together easily and snap into

place. If they do not, turn one connector and try

again. IF YOU DO NOT CONNECT THE CON-

NECTORS PROPERLY, THE CONSOLE MAY

BECOME DAMAGED WHEN YOU TURN ON

THE POWER. Then, remove the wire tie from

the Upright Wire.

Console

Assembly

Wire

Tie

Console

Wire

9. Set the console assembly on the Handrails (84).

Be careful not to pinch any wires. Insert the

excess Upright Wire (81) into the Right

Upright (90).

Attach the console assembly with the four 1/4" x

1/2" Screws (2) removed in step 7 and four 1/4"

Star Washers (26); do not tighten the Screws

yet.

Console Assembly

Console

Wire