User's Manual

13. Orient the Latch Assembly (62) so that the knob

is on the side shown. Attach the Latch Assembly

to the Left Upright (89) with two 1/4" x 4 1/2"

Screws (6) and two 1/4" Star Washers (26); start

both Screws, and then tighten them.

Knob

12. Identify the Left and Right Handrail Covers (87,

8).

Slide the Left Handrail Cover (87) up against the

console assembly and tighten a #8 x 3/4" Screw

(4) into the bottom of the Left Handrail Cover; do

not overtighten the Screw.

Attach the Right Handrail Cover (8) in the

same way.

Console

Assembly