User's Manual

9
8. Identify the Left Handrail (106). Set the Left
Handrail onto the top of the Left Upright (77).
Attach the Left Handrail (106) to the Left Upright
(77) with three 5/16" Star Washers (9) and three
5/16" x 3/4" Bolts (4). Start the Bolts but do
not tighten them yet.
4
4
9
106
77
8
7. Orient the Crossbar (78) so that the indicated
bump is positioned as shown. Attach the
Crossbar to the Left Upright (77) and the Right
Upright (79) with four 1/4" x 5/8" Bolts (7). Do
not fully tighten the Bolts yet.
77
79
78
Bump
7
7
7
6. Hold a Bolt Spacer (84) inside the lower end of
the Left Upright (77). Insert a 3/8" x 4" Bolt (5)
with a 3/8" Star Washer (12) into the Left
Upright and the Bolt Spacer. Repeat this step
w
ith a second Bolt Spacer (84), 3/8" x 4" Bolt
(5), and 3/8" Star Washer (12).
Hold the Left Upright Spacer (82) and the Left
U
pright (77) against the Base (60). Tighten the
3/8" x 4" Bolts (5) until the heads of the Bolts
touch the Left Upright; do not fully tighten the
Bolts yet.
Press a Base Cap (85) into the Base (60). With
the help of a second person, tip the treadmill so
that the Base is flat on the floor.
82
7
7
5
60
84
84
85
12
6