User's Manual

4. Hold the Left Upright (75) against the Base (80).

Be careful not to pinch the wires. Partially

tighten three 3/8" x 4" Screws (4) with three 3/8"

Star Washers (5) into the Left Upright and the

Base. Do not fully tighten the Screws yet.

Attach the Right Upright (not shown) in the

same way. Note: There are no wires on the right

side.

Wires

5. Identify the Left and Right Base Covers (73, 74).

Slide the Left and Right Base Covers onto the

Left and Right Uprights (75, 76) as shown.

Remove the tie from the Upright Wire (70).

Wire

Tie