User's Manual

13
83
35
92
87
9
9
8
8. Identify the Left and Right Trays (92, 35).
Attach the Trays (92, 35) to the Console Base
(83) with eight #8 x 1/2" Screws (9). Note: It may
be easier to start the two inside Screws and then
slide the Trays into place before starting the
other six Screws.
Note: It may be necessary to rotate the Console
Frame (87) upward when attaching the Trays
(92, 35).
9
9
9
9. IMPORTANT: To avoid damaging the Pulse
Crossbar (31), do not use power tools and do
not overtighten the #10 x 3/4" Screws (13).
Orient the Pulse Crossbar (31) as shown. Attach
the Pulse Crossbar to the left and right Handrails
(71) with four #10 x 3/4" Screws (13) and four
#10 Star Washers (11). Start all four Screws,
and then tighten them.
Make sure that the Upright Wire (70) is not
pinched. Firmly tighten the four 5/16" x 2 3/4"
Screws (10).
9
13
13
11
11
10
10
71
31
71
70