User's Manual

22
HOW TO USE THE SOUND SYSTEM
To play music or audio books through the console
sound system while you exercise, plug a 3.5 mm male
to 3.5 mm male audio cable (not included) into the jack
on the console and into a jack on your MP3 player,
CD player, or other personal audio player; make sure
that the audio cable is fully plugged in. Note: To
purchase an audio cable, see your local electronics
store.
Next, press the play but-
ton on your personal audio
player. Adjust the volume
level using the volume
increase and decrease
buttons on the console or
the volume control on your
personal audio player.
If you are using a personal CD player and the CD
skips, set the CD player on the oor or another at
surface instead of on the console
THE INFORMATION MODE
The console features an information mode that keeps
track of treadmill usage information. The information
mode also allows you to select miles or kilometers as
the unit of measurement.
To select the information mode, hold down the Stop
button, insert the key into the console, and then re-
lease the Stop button. When the information mode is
selected, the following information will appear in the
display:
• The number of
hours that the
treadmill has
been
operated.
• The total number of miles or kilometers that the
walking belt has moved.
• An “E” for English miles or an “M” for metric kilome-
ters. To change the unit of measurement, press the
Speed decrease button.
• An “On,” “Off,” or “Auto” for the backlight setting. To
change the backlight setting, press the Speed in-
crease button.
To exit the information mode, remove the key from the
console.