proform.com Model No. PFTL97718.1 Serial No. Write the serial number in the space above for reference. Serial Number Decal ACTIVATE YOUR WARRANTY To register your product and activate your warranty today, go to my.proform.com. CUSTOMER CARE For service at any time, go to proformservice.com. Or call 1-888-533-1333 Mon.–Fri. 6 a.m.–6 p.m. MT Sat. 8 a.m.–12 p.m. MT Please do not contact the store. CAUTION Read all precautions and instructions in this manual before using this equipment.
TABLE OF CONTENTS WARNING DECAL PLACEMENT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 IMPORTANT PRECAUTIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 BEFORE YOU BEGIN. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
IMPORTANT PRECAUTIONS WARNING: To reduce the risk of burns, fire, electric shock, or injury to persons, read all important precautions and instructions in this manual and all warnings on your treadmill before using your treadmill. ICON assumes no responsibility for personal injury or property damage sustained by or through the use of this product. 1. It is the responsibility of the owner to ensure that all users of this treadmill are adequately informed of all warnings and precautions. 12.
able to safely lift 45 lbs. (20 kg) to move the treadmill. 19. Always stand on the foot rails when starting or stopping the walking belt. Always hold the handrails while using the treadmill. 26. When folding or moving the treadmill, make sure that the storage latch is holding the frame securely in the storage position. Do not operate the treadmill while it is folded. 20. When a person is walking on the treadmill, the noise level of the treadmill will increase. 21.
STANDARD SERVICE PLANS all 5
BEFORE YOU BEGIN Thank you for selecting the new PROFORM® COACHLINK T 9.0 treadmill. The COACHLINK T 9.0 treadmill provides an impressive selection of features designed to make your workouts at home more effective and enjoyable. reading this manual, please see the front cover of this manual. To help us assist you, note the product model number and serial number before contacting us. The model number and the location of the serial number decal are shown on the front cover of this manual.
PART IDENTIFICATION CHART Use the drawings below to identify small parts used for assembly. The number in parentheses below each drawing is the key number of the part, from the PART LIST near the end of this manual. The number following the key number is the quantity used for assembly. Note: If a part is not in the hardware kit, check to see whether it is preattached. Extra parts may be included.
ASSEMBLY • Assembly requires two persons. • To identify small parts, see page 7. • Place all parts in a cleared area and remove the packing materials. Do not dispose of the packing materials until you finish all assembly steps. • Assembly requires the following tools: the included hex keys one Phillips screwdriver • After shipping, there may be an oily substance on the exterior of the treadmill. This is normal.
2. Make sure that the power cord is unplugged. 2 80 A Remove the tie securing the Upright Wire (80) to the front of the Base (88). Next, identify the Right Upright (79). Have a second person hold the Right Upright near the Base (88). 80 79 See the inset drawing. Tie the wire tie (A) in the Right Upright (79) securely around the end of the Upright Wire (80). Then, insert the Upright Wire into the lower end of the Right Upright as you pull the other end of the wire tie through the Right Upright.
4. Set the Right Upright (79) on the Base (88) as shown. Make sure not to pinch the Upright Wire (80). Slide the Right Upright so that the 3/8" x 2 3/8" Screw (2) in the Base is inserted into the slot in the Right Upright. Do not tighten the Screw yet. 4 80 Slot 2 79 88 5. Attach the Right Upright (79) to the Base (88) with a 3/8" x 2 3/8" Screw (2), a 3/8" x 1 1/4" Screw (3), a 3/8" x 1 1/2" Screw (4), and three 3/8" Star Washers (6) as shown; do not fully tighten the Screws yet.
6. Remove and save the four indicated 5/16" x 3/4" Screws (13). 6 13 13 7. Attach a Handrail (72) to the Right Upright (79) with two 5/16" x 2" Screws (5) and two 5/16" Star Washers (7); start both Screws, and then tighten them. Make sure not to pinch the Upright Wire (80). 7 5 7 E Then, remove and discard the two indicated screws (E).
8. Attach the other Handrail (72) to the Left Upright (78) with two 5/16" x 2" Screws (5) and two 5/16" Star Washers (7); start both Screws, and then tighten them. 8 5 7 Then, remove and discard the two indicated screws (E). E 72 78 9. Carefully slide the Upright Crossbar (77) between the Left and Right Uprights (78, 79). Attach the Upright Crossbar with the four 5/16" x 3/4" Screws (13) that you removed in step 6 and four 5/16" Star Washers (7); start all four Screws, and then tighten them.
10. Set the Upright Tray (90) on the Upright Crossbar (77). Attach the Upright Tray with four #8 x 3/4" Screws (11); start all four Screws, and then tighten them. Do not overtighten the Screws. 10 90 11. Set the Console Base (74) face down on a soft surface to avoid scratching the Console Base. 11 11 77 11 10 86 10 Remove and discard the two indicated screws (F). Then, remove the Pulse Crossbar (75). 10 Next, identify the Left and Right Trays (85, 86).
12. IMPORTANT: To avoid damaging the Pulse Crossbar (75), do not use power tools and do not overtighten the #10 x 3/4" Screws (9). 12 9 8 Orient the Pulse Crossbar (75) as shown. Attach the Pulse Crossbar to the Handrails (72) with four #10 x 3/4" Screws (9) and four #10 Star Washers (8); start all four Screws, and then tighten them. 75 72 9 8 72 13. With the help of a second person, hold the console assembly (G) near the Handrails (72).
14. Set the console assembly (G) on the Handrails (72). Make sure that no wires are pinched. 14 Insert the excess Upright Wire (80) into the console assembly (G). Next, tighten the two ties (I) around the Upright Wire, and cut off the ends of the ties. G Then, attach the console assembly (G) with the four 5/16" x 3/4" Screws (13) that you removed in step 11 and four 5/16" Star Washers (7); do not tighten the Screws yet. 80 72 72 I 7 7 13 15.
. Set the Left Handrail Cover (70) on the left Handrail (72). Start two #8 x 3/4" Screws (11) into the left Handrail and the Left Handrail Cover. Next, slide the Left Handrail Cover forward against the console assembly (G) as shown. Then, tighten both Screws. 16 G Then, attach the Left Handrail Bottom (14) to the Handrail (72) with two #8 x 3/4" Screws (11). 70 Attach the Right Handrail Cover (71) and the Right Handrail Bottom (12) to the right Handrail (72) as described above.
18. Press the two tabs on the Tablet Holder (26) into the slots (K) in the console assembly (G). 18 26 Attach the Tablet Holder (26) with four M4 x 16mm Screws (24). Note: Start the two top Screws first, and then start the two bottom Screws. Be careful not to overtighten the Screws. Start First IMPORTANT: The Tablet Holder (26) is designed for use with most full-size tablets. Do not place any other electronic device or object in the Tablet Holder. 19. Tighten all eight indicated Screws (2, 3, 4).
20. IMPORTANT: You must activate your Console (31) to begin using its exclusive features. 20 First, plug in the power cord (see page 19) and turn on the power (see page 21). 31 Then, using your smartphone or tablet, go to iFit.com/activate and follow the instructions to activate the Console (31). Note: If you do not have a smartphone or tablet, use your computer to go to iFit.com/activate for an alternate way to activate the Console (31).
HOW TO USE THE TREADMILL HOW TO CONNECT THE POWER CORD more amps. To avoid overloading the circuit, do not plug other electrical devices, except for lowpower devices such as cell phone chargers, into the surge suppressor or into an outlet on the same circuit. IMPORTANT: If the treadmill is connected to an AFCI-equipped outlet and your circuit breaker trips repeatedly when the treadmill is used, see the front cover of this manual to purchase an arc filter.
CONSOLE DIAGRAM FEATURES OF THE CONSOLE You can even listen to your favorite workout music or audio books with the console’s sound system while you exercise. IMPORTANT: To activate your console and begin using its exclusive features, see assembly step 20 on page 18. To turn on the power, see page 21. To use the manual mode, see page 21. To use an onboard workout, see page 23. To connect your tablet to the console, see page 24. To connect your heart rate monitor to the console, see page 25.
HOW TO TURN ON THE POWER HOW TO USE THE MANUAL MODE IMPORTANT: If the treadmill has been exposed to cold temperatures, allow it to warm to room temperature before you turn on the power. If you do not do this, you may damage the console displays or other electrical components. 1. Insert the key into the console. Plug in the power cord (see page 19). Next, locate the power switch on the treadmill frame near the power cord. Make sure that the switch is in the reset position.
4. Change the incline of the treadmill as desired. Vertical Distance (VRT FT or VRT M)—The distance you have walked or run in vertical feet or vertical meters. To change the incline of the treadmill, press the Incline increase and decrease buttons or one of the numbered Quick Incline buttons. Each time you press the Incline increase or decrease button, the incline setting will change by 0.5 percent.
6. Measure your heart rate if desired. HOW TO USE AN ONBOARD WORKOUT You can measure your heart rate using either the handgrip heart rate monitor or a compatible heart rate monitor. For information about purchasing an optional chest heart rate monitor, see page 27. 1. Insert the key into the console. See HOW TO TURN ON THE POWER on page 21. 2. Select an onboard workout. The console is compatible with all BLUETOOTH® Smart heart rate monitors.
To stop the workout at any time, press the Stop button. To restart the workout, press the Start button. The walking belt will begin to move at 1 mph. When the next segment of the workout begins, the treadmill will automatically adjust to the speed and incline settings for that segment. HOW TO CONNECT YOUR TABLET TO THE CONSOLE The console supports BLUETOOTH connections to tablets via the iFit Smart Cardio Equipment app and to compatible heart rate monitors.
4. Record and track your workout information. THE SETTINGS MODE Follow the instructions in the iFit Smart Cardio Equipment app to record and track your workout information. 1. Select the settings mode. To select the settings mode, press the Settings button. The first settings screen will appear in the display. Note: If you have selected a workout, you may need to press the Stop button repeatedly to return to the main menu before selecting the settings mode. 5.
Display Test—This screen is intended to be used by service technicians to identify whether the display is working correctly. Contrast Level—The currently selected contrast level will appear in the display. Press the Incline increase and decrease buttons to adjust the contrast level. Button Test—This screen is intended to be used by service technicians to identify whether a certain button is working correctly. Total Time—The word TIME will appear in the display.
HOW TO USE THE SOUND SYSTEM HOW TO USE THE TABLET HOLDER To play music or audio books through the console sound system while you exercise, plug a 3.5 mm male to 3.5 mm male audio cable (not included) into the jack on the console and into a jack on your personal audio player; make sure that the audio cable is fully plugged in. Note: To purchase an audio cable, see your local electronics store. IMPORTANT: The tablet holder is designed for use with most full-size tablets.
FCC INFORMATION This console has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
HOW TO FOLD AND MOVE THE TREADMILL HOW TO FOLD THE TREADMILL HOW TO MOVE THE TREADMILL To avoid damaging the treadmill, adjust the incline to zero before you fold the treadmill. Then, remove the key and unplug the power cord. CAUTION: You must be able to safely lift 45 lbs. (20 kg) to raise, lower, or move the treadmill. Before moving the treadmill, fold it as described at the left. CAUTION: Make sure that the latch plate is resting against the latch pin. Moving the treadmill may require two people. 1.
MAINTENANCE AND TROUBLESHOOTING MAINTENANCE b. After the power cord has been plugged in, make sure that the key is inserted into the console. Regular maintenance is important for optimal performance and to reduce wear. Inspect and properly tighten all parts each time the treadmill is used. Replace any worn parts immediately. c. Check the power switch located on the treadmill frame near the power cord. If the switch protrudes as shown, the switch has tripped.
c. Your treadmill features a walking belt coated with high-performance lubricant. IMPORTANT: Never apply silicone spray or other substances to the walking belt or the walking platform unless instructed to do so by an authorized service representative. Such substances may deteriorate the walking belt and cause excessive wear. If you suspect that the walking belt needs more lubricant, see the front cover of this manual. SYMPTOM: The incline of the treadmill does not change correctly a.
SYMPTOM: The walking belt slips when walked on SYMPTOM: The tablet holder does not stay in place a. First, remove the key and UNPLUG THE POWER CORD. Using the hex key, turn both idler roller screws clockwise, 1/4 of a turn. When the walking belt is correctly tightened, you should be able to lift each edge of the walking belt 2 to 3 in. (5 to 7 cm) off the walking platform. Be careful to keep the walking belt centered.
EXERCISE GUIDELINES Burning Fat—To burn fat effectively, you must exercise at a low intensity level for a sustained period of time. During the first few minutes of exercise, your body uses carbohydrate calories for energy. Only after the first few minutes of exercise does your body begin to use stored fat calories for energy. If your goal is to burn fat, adjust the intensity of your exercise until your heart rate is near the lowest number in your training zone.
PART LIST Key No. Qty. 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 2 4 2 2 4 6 12 4 6 8 64 1 8 1 3 2 2 4 16 1 1 2 4 4 4 1 6 6 14 2 1 2 4 1 3 10 2 1 1 4 1 1 1 1 2 1 2 2 1 Model No. PFTL97718.1 R0118A Description Key No. Qty.
Key No. Qty. 99 100 101 1 2 2 Description Key No. Qty. M8 x 102mm Bolt M8 x 20mm Bolt M8 Star Washer 102 * 2 – Description M8 Flange Nut User’s Manual Note: Specifications are subject to change without notice. For information about ordering replacement parts, see the back cover of this manual. *These parts are not illustrated.
11 19 36 15 33 40 25 29 42 19 11 56 41 18 29 89 19 33 40 15 11 19 29 11 19 89 11 25 51 44 36 91 55 18 45 38 19 33 29 19 29 19 89 18 23 89 29 36 89 40 54 43 47 25 29 19 18 46 53 39 48 27 17 92 33 98 94 40 29 19 34 25 22 100 89 23 99 36 93 101 45 29 19 15 100 50 17 48 102 101 47 27 27 27 30 49 EXPLODED DRAWING A Model No. PFTL97718.
EXPLODED DRAWING B Model No. PFTL97718.
EXPLODED DRAWING C Model No. PFTL97718.
EXPLODED DRAWING D Model No. PFTL97718.
ORDERING REPLACEMENT PARTS To order replacement parts, please see the front cover of this manual.