Installation Guide

16
Veneer Plaster Accessories*
Used in Both One-Coat and Two-Coat Systems
* Metal products are not manufactured by National Gypsum Company.
VENEER CORNERBEAD
Formed of galvanized steel to protect
exterior corners with veneer plas-
tering. Flange length 1-1/4".
EXPANDED VENEER
CORNERBEAD
Used as an alternate to the Kal-
Korner Bead for exterior corners.
Has 1-1/4" flanges.
ARCH CORNERBEAD
Can be used straight for exterior
corners or flanges, or may be
snipped and bent to form arches.
ENEER J TRIM CASING BEAD
Used as a finished edge at door
and window jambs by slipping over
edge of plaster base.
VENEER L TRIM CASING BEAD
Used as a finished edge at door
and window jambs.
E-Z STRIP
®
CONTROL JOINT
Designed for drywall or veneer
plaster systems. A vinyl extrusion
used as an expansion or control
joint for ceilings or partitions.
KAL-MESH TAPE
A coated non-adhesive fiberglass
tape which is stapled to Kal-Kore
to reinforce all joints and interior
angles.
1-1/2" DRYWALL FURRING
CHANNEL CLIP
Attaches screw furring channel to
1-1/2" cold rolled steel channel.
.093 ZINC CONTROL JOINT
Designed as an expansion or
control joint for ceiling and
partition areas for both drywall
or veneer plaster systems.