User's Manual

17
HOW TO USE THE WEIGHT LOSS CENTER
1. Insert the key into the console.
See HOW TO TURN ON THE POWER on page 15.
2. Select a weight loss workout.
To use a calorie goal workout, press the Weight
Loss Center button.
Input your weight, the number of calories you wish
to burn, and the desired workout duration by re-
peatedly pressing the increase or decrease button
next to the Weight Loss Center button. Hold down
the increase or decrease button to rapidly change
your weight or the workout duration. Press the Enter
button after each selection. Note: Once you have
entered your weight, it will be saved in memory. The
profiles on the console represent the speed set-
tings of the workout.
3. Start the walking belt.
Press the Start button or the Speed increase button
to start the workout. A moment after you press the
button, the treadmill will automatically adjust to the
first speed and incline settings of the workout. Hold
the handrails and begin walking.
Each workout is divided into segments. One speed
setting and one incline setting are programmed for
each segment. Note: The same speed setting
and/or incline setting may be programmed for con-
secutive segments.
Tones will sound at the end of each segment. If a
different speed setting and/or incline setting is pro-
grammed for the second segment, the speed set-
ting and/or incline setting will flash in the display for
a moment to alert you. The treadmill will then auto-
matically adjust to the speed and incline settings for
the second segment.
The workout will continue in this way until the last
segment ends. The walking belt will then slow to a
stop.
If the speed or incline setting is too high or too low
at any time during the workout, you can manually
override the setting by pressing the speed or incline
buttons; however, when the next segment be-
gins, the treadmill will automatically adjust to
the speed and incline settings for the next seg-
m
ent.
T
o stop the workout at any time, press the Stop
button. To restart the workout, press the Start button
or the Speed increase button. The walking belt will
begin to move at 1 mph. When the next segment of
the workout begins, the treadmill will automatically
adjust to the speed and incline settings for the next
segment.
4. Select a display mode and monitor your
progress with the display.
When the weight loss center is selected, the con-
sole offers two display modes. Press the Display
button repeatedly to select the desired display
mode. The display can show the following workout
information:
• Workout informa-
tion bars which
show your
progress during
the workout.
• A profile of the speed settings of the workout. The
arrow below the profile will indicate your
progress.
• The time remaining.
• The distance that you have walked or run.
• The approximate number of calories you have
burned.
• The incline level of the treadmill.
• The speed of the walking belt.
5. Measure your heart rate if desired.
See step 6 on page 16.
6. When you are finished exercising, remove the
key from the console.
See step 7 on page 16.