Owner's Manual

M8 x 23mm x

2mm Washer

(31)–8

M8 Split

Washer (97)–10

M4 x 16mm

Round Head

Screw (92)–14

Wave Washer

(80)–2

M10 Split

Washer (99)–2

M10 x 80mm Button Bolt (93)–2

Large Wave

Washer (89)–2

M8 x 23mm x

1mm Washer

(102)–4

M8 Nylon

Locknut (84)–6

M8 x 58mm Shoulder

Bolt (88)–2

M8 x 45mm Button

Screw (90)–10

M8 x 19mm Patch

Screw (86)–4

M8 Curved

Washer (29)–4

M8 x 23mm Patch

Shoulder Screw (103)–4

ASSEMBLY

To hire an authorized service technician to assemble the elliptical exerciser, call 1-800-445-2480.

Assembly requires two persons. Place all parts of the elliptical exerciser in a cleared area and remove the

packing materials. Do not dispose of the packing materials until assembly is completed. In addition to the

included hex keys, assembly requires a Phillips screwdriver , an adjustable

wrench , and a rubber mallet .

As you assemble the elliptical exerciser, use the drawings below to identify small parts. The number in parentheses

below each drawing is the key number of the part, from the PART LIST near the end of this manual. The number

following the parentheses is the quantity needed for assembly. Note: Some small parts may have been pre-

assembled. If a part is not in the parts bag, check to see if it has been pre-assembled.