Owner's Manual

9
8
9
9. Identify the Right Pedal (35), which is marked
with an “R” sticker. Orient the Right Pedal and a
Pedal Arm (32) as shown.
Attach the Right Pedal (35) to the Pedal Arm
(32) with three M8 x 45mm Button Screws (90),
three M8 Split Washers (97), and three M8 x
23mm x 2mm Washers (31).
Repeat this step to attach the Left Pedal (not
shown) to the other Pedal Leg (not shown).
65
24
72
71
80
102
103
26
26
103
102
80
10
8. Apply a generous amount of the included grease
to the Upper Body Axle (71). Insert the Upper
Body Axle into the Upright (10). Be careful not
to damage the Upper Wire Harness (65).
Apply a small amount of grease to a Wave
Washer (80) and to an M8 x 23mm x 1mm
Washer (102). Slide the Wave Washer onto the
left end of the Upper Body Axle (71).
Identify the Left Upper Body Leg (24), which is
marked with an “L” sticker, and orient it as
shown. Slide the Left Upper Body Leg onto the
left side of the Upper Body Axle (71).
Attach the Left Upper Body Leg (24) to the Upper
Body Axle (71) with an M8 x 23mm Patch
Shoulder Screw (103), an Outer Upper Body
Cover (26), and an M8 x 23mm x 1mm Washer
(102).
Repeat this step for the Right Upper Body
Leg (72).
Grease
35
32
31
31
90
97
97
Grease