Owner's Manual

15
HOW TO USE A PERSONAL TRAINER QUICK
PROGRAM
1
. Insert the key into the console.
S
ee HOW TO TURN ON THE POWER on page
13.
2. Select one of the personal trainer quick
programs.
To select one of the twelve personal trainer quick
programs, press one of the six Personal Trainer
Quick Programs buttons. If you press the button a
second time the intensity of the program will in-
crease by 1 mph. If you press the button a third
time the treadmill will return to the manual mode.
A few seconds
after you select a
personal trainer
program, the max-
imum incline set-
ting and the maxi-
mum speed set-
ting of the program will flash in the display for a few
seconds. The display will then show how long the
program will last. A profile of the speed settings of
the program will scroll across the matrix.
3. Press the Start button or the Quick Speed in-
crease button to start the program.
A moment after you press the button, the treadmill
will automatically adjust to the first speed and in-
cline settings for the program. Hold the handrails
and begin walking.
Each program is divided into 30 one-minute seg-
ments. One speed setting and one incline setting
are programmed for each segment. Note: The
s
ame speed setting and/or incline setting may be
programmed for consecutive segments.
During the workout, the profile will show your
progress. The flashing segment of the profile repre-
sents the current segment of the workout. The
height of the flashing segment indicates the speed
setting for the current segment. At the end of each
segment, a series of tones will sound and the next
segment of the profile will begin to flash. The new
speed and incline settings will appear in the dis-
plays for a few seconds.
If the speed or incline setting is too high or too low
at any time during the workout, you can manually
override the setting by pressing the speed or incline
buttons; however, when the next segment of the
workout begins, the treadmill will automatically
adjust to the speed and incline settings for the
next segment.
To stop the workout at any time, press the Stop
button. To restart the workout, press the Start but-
ton or the Speed increase button. The walking belt
will begin to move at 1 mph. When the next seg-
ment of the workout begins, the treadmill will auto-
matically adjust to the speed and incline settings for
the next segment.
The workout will continue in this way until the last
segment of the workout ends. The walking belt will
then slow to a stop.
Profile