Exercise Bike User's Manual

ASSEMBLY

Assembly requires two persons. Place all parts of the exercise cycle in a cleared area and remove the packing

materials. Do not dispose of the packing materials until assembly is completed.

Assembly requires the included tools and your own adjustable wrench and Phillips screw-

driver

Use the part drawings below to identify the small parts used in assembly. The number in parenthesis below

each drawing refers to the key number of the part, from the PART LIST on page 14. The second number refers

to the quantity needed for assembly. Note: Some small parts may have been pre-attached for shipping. If a

part is not in the parts bag, check to see if it has been pre-attached.

M8 Nylon M10 Black Nylon M8 Black Split M10 Split

Locknut (10)-4 Locknut (34)-6 Washer (42)-7 Washer (46)-2

M8 x 25mm Button

Screw (47)-3

M4 x 16mm

Screw (32)-5

M10 x 42mm Button

Bolt (6)-2

M10 x 75mm Carriage Bolt (33)-4

Identify the Front Stabilizer (2). While another person

lifts the front of the Frame (1) slightly, attach the Front

Stabilizer to the Frame with two M10 x 75mm Carriage

Bolts (33) and two M10 Black Nylon Locknuts (34).