Owner's Manual

HOW TO USE THE CONSOLE

Before using the console, make sure that batteries are

installed (see assembly step 7 on page 8). If there is a

sheet of plastic on the display, remove the plastic.

Follow the steps below to operate the console.

1. Turn on the console.

To turn on the console, press the On/Reset button

or begin pedaling. The entire display will light for a

moment; the console will then be ready for use.

2. Follow your progress with the display.

The lower left

display can show the

elapsed time and the

distance (in miles or

kilometers) that you

have pedaled.

The lower right dis-

play can show your

pedaling speed (in

miles or kilometers per

hour) and the approxi-

mate number of

calories you have burned. When you use the

handgrip pulse sensor, the lower right display will

also show your heart rate (see step 3 on page 13).

The upper display is

the priority display.

The priority display

can show the elapsed

time, the distance that

you have pedaled,

your pedaling speed, or the approximate number

of calories you have burned.

Press the Priority Display button repeatedly until

the priority display shows the information that you

are most interested in viewing.

Note: While information is shown in the priority dis-

play, the same information will not be shown in the

lower left or lower right display.

CONSOLE DIAGRAM