User Manual

Air Remote – Air Sync
14
www.profoto.com
When the Profoto Air device is used as a receiver for remote flash synchronization, the
device shall be connected to the generator’s sync input socket or to the speedlight’s PC
terminal via a cable connected to the Out Connector [18].
For remote camera release in single mode, the Profoto Air Sync or Profoto Air Remote
device shall be connected to the camera via a cable connected to the Out Connector [18].
For remote camera release in continuous mode, the Profoto Air Sync or Profoto Air Remote
device shall be connected to the camera via a cable connected to the In Connector [17].
Batteries
The Profoto Air Sync and Profoto Air Remote devices are powered by two standard AAA
batteries
.