User Manual

Air Remote – Air Sync
16
www.profoto.com
Generator setup (with built-in Profoto Air)
1. Set the generator to synchronization via radio.
2. Select the same radio channel on all generators.
Synchronization
1. Press and hold down the On Button [5] to turn on the
Profoto Air device on the camera.
2. Verify that the Transmit Indicator [3] is illuminated.
3. Press the Channel Button [2] until the desired
Channel Indicator [1] is illuminated. The selected
channel shall be the same as the radio channel
setting on the generators and/or speedlights.
4. Press the Test Button [6] to verify that the generators
and/or speedlights flash as expected.
Remote generator control
Generators with built-in Profoto Air functionality can be
remotely controlled with a Profoto Air Remote device.
Generator setup
1. Set the generator to synchronization via radio.
2. Select the same radio channel on all generators.
3. Select the same group settings for all lamp heads
that shall be controlled simultaneously.
Profoto Air Remote setup
1. Press and hold down the On Button [5] to turn on the
Profoto Air Remote device.
2. Verify that the Transmit Indicator [3] is illuminated.
3. Press the Channel Button [2] until the desired
Channel Indicator [1] is illuminated. The selected
channel shall be the same as the radio channel
setting on the generators.
4. Press the Group Button [15] until the desired Group
Indicator [16] is illuminated. The selected group shall
be the same as the group setting for the lamp heads
to be controlled.
5
6
7
2
3
4
1