User Manual

Air Remote – Air Sync
19
www.profoto.com
Receiver setup
This section applies to the Profoto Air device used as receiver for both wireless remote
camera release and remote camera release via cable.
1. Press and hold down the On Button [5] to turn on the Profoto Air device used as receiver.
2. Press the Channel Button [2] to select a radio channel, as indicated by the Channel
Indicator [1].
3. Press the Mode Button [4] and verify that the Receive Indicator [7] is illuminated.
Releasing camera wirelessly
1. Press and hold down the On Button [5] to turn on the handheld Profoto Air device used
as transmitter.
2. Verify that the Transmit Indicator [3] is illuminated.
3. Press the Channel Button [2] until the same Channel Indicator [1] as on the Profoto Air
device connected to the camera is illuminated.
4. Press and hold down the Test Button [6] until the camera is released.
Releasing camera via cable
With only one Profoto Air device connected via cable to the camera, the unit can be used
to remotely release the camera by wire.
1. Press and hold down the Test Button [6] on the Profoto Air device connected to the
camera until the camera is released.