User Manual

Air Remote – Air Sync
22
www.profoto.com
Generator setup (without built-in Profoto Air)
1. Connect a Profoto Air device to the generator, via a
cable from the Out Connector [17] on the device to
the sync input socket on the generator.
2. Turn on the Profoto Air device and ensure that the
Receive Indicator [7] is illuminated.
3. Select the same radio channel as on the Profoto Air
device acting as transmitter on the camera.
Generator setup (with built-in Profoto Air)
1. Set the generator to synchronization via radio.
2. Select the same radio channel as on the Profoto Air
device acting as transmitter on the camera.
Releasing and relaying
1. Turn on the handheld Profoto Air device and verify
that the Transmit Indicator [3] is illuminated.
2. Select the same radio channel as on the Profoto Air
device acting as receiver on the camera.
3. Press and hold down the Test Button [6] until the
camera is released and the generator(s) flash.