User Manual

Air Remote – Air Sync
23
www.profoto.com
Additional functions
Fast mode
Fast mode is used when an extra short sync signal delay is required.
1. To enter Fast mode, press and hold down the Mode Button [4] for 7 seconds, until there
is a beep and the Transmit Indicator [3] starts to blink fast.
2. To exit Fast mode, press the Mode Button [4] once.
Silent mode
This section only applies to the Profoto Air Remote device.
1. Ensure that the Profoto Air device is turned off.
2. To enter Silent mode, press and hold down the Head Button 0 [10] and the On Button
[5] simultaneously until the Transmit Indicator [3] is illuminated.
3. Silent mode is automatically disabled when the device is turned off.
Disable Auto Power Off
1. Ensure that the Profoto Air device is turned off.
2. To disable the Auto Power Off function, press and hold down the Mode Button [4] and
the On Button [5] simultaneously. When deactivating the auto power off function, the
device confirms this with a short beep immediately.
3. The Auto Power Off function is automatically enabled when the device is turned off.
Factory settings
1. Ensure that the Profoto Air device is turned off.
2. To reset the Profoto Air device to factory settings, press and hold down the Test Button
[6] and the On Button [5] simultaneously until there are three beeps.